123 HP Deskjet 3722 Printer Setup


123 HP Deskjet 3722 Printer Setup

HP-Deskjet-3755

Printer Support Service Features.

123 HP Setup 3722
HP Deskjet 3722 Support
HP Deskjet 3722 Airprint Setup
123 HP Setup Deskjet 3722
HP Deskjet 3722 windows 10
HP Deskjet 3722 Wireless Setup
HP ePrint Deskjet 3722 Installation
HP Deskjet 3722 driver Software
HP Deskjet 3722 printer driver download
Install HP 3722 printer without disk
HP Deskjet 3722 Troubleshooting
HP Deskjet 3722 iPhone driver

123 HP Deskjet 3722 Work with cartridges

  • Leave the cartridges in the original sealed packages until they are needed.
  • Store cartridges at room temperature (15-35° C or 59-95° F).
  • Turn off the printer properly when not in use.
  • Do not rough handle the cartridges.
  • Do not clean the print head unnecessarily. This might shorten the life of the cartridges.
  • While transporting the printer, move it flat.And do not remove the cartridges

NOTE: Use the ink cartridges until they are empty. Refilling cartridges prior to exhaustion might cause your printer to fail.

Replace the cartridges

  • Make sure the printer is turned on.
  • Open the cartridge access door.
  • Press the front of the cartridge to release it, and then remove it from the slot.
  • Slide the new cartridge into the empty slot
  • Close the cartridge access door.

Setting up the printer for 123 HP Deskjet 3722 wireless communication

Step 1:

Prior to setting up, the printer for wireless communication disconnects the Ethernet cable. Ensure the wireless network is set up and working properly. The printer and the computers that use the printer should be on the same network (subnet).Once connected, enter the name of the wireless network and the password which comes with the documentation provided with the wireless router.

Step 2:

Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication.

  • From the printer control panel select wireless
  • Go toSettings > Wireless Settings> Wireless Setup Wizard or Wi-Fi Protected Setup.
  • The instructions displayed should be followed to achieve the setup.

Step 3:

Changing the connection type

The connection type could be changed after the installation of HP printer software.

To change from an Ethernet connection to a wireless connection (Windows)

Run the Wireless Setup Wizard after detaching the Ethernet cable. The wireless connection will be established.

To change from a USB connection to a wireless network (Windows)

Open the HP printer software>Tools>Device setup & Software> Convert a USB connected printer to wireless.

Follow the onscreen instructions.

To change from a wireless connection to a USB or Ethernet connection (Windows)

Connect the USB or Ethernet cable to the printer.

To change from a wireless connection to a USB or Ethernet connection (OS X)

  • Add the printer to the print queue.
  • Open System Preferences.
  • Click Printers & Scanners Select your printer
  • Do the same for the fax entry Open HP Utility
  • Choose Devices >Setup New Device and follow the prompts

Step 4

Test the wireless connection

Print a wireless test report. It provides information about the printer status, hardware (MAC) address, IP address and diagnostic information in case of a failure

Wireless>settings>Print Reports>Wireless Test Report

Download latest driver link below : 123.hp.com/setup 3722 or 123.hp.com/dj3722

123 HP DJ 3722 Fax

To send a standard fax from the printer control panel

  1. Load the document print-side down on the scanner glass or print-side up in the document feeder.
  2. Choose Fax on the printer control panel.
  3. Tap on Send Now.
  4. Enter the fax number you want to send it to.

5.Choose between black and color.

To send a standard fax from the computer

  • Open the document on your computer.
  • From the file menu, choose
  • Select the printer which has Fax in the name.
  • Open the Properties dialog box to change settings if required.
  • Enter the fax number of the recipient, followed by Send Fax
  • The printer begins dialing the fax number and faxing the document.

To send a fax to multiple recipients

You can send a fax to multiple recipients by creating a group phone book contact made up of two or more individual recipients.

To send a fax from a phone

You can send a fax using your telephone extension which allows you to talk to the recipient before sending the fax.

  1. Load the document print-side down on the scanner glass or print-side up in the document feeder.
  2. Dial the number by using the keypad on the phone that is connected to the printer.
  3. Select
  4. Touch Send Now.
  5. Choose between Black and Color.

The telephone goes silent while the fax is transmitting.

To receive a fax

  • You can receive faxes automatically or manually.
  • Turn off the Auto Answer option to receive faxes manually.
  • Turn on the Auto Answer option (the default setting) for the printer to automatically answer the incoming calls and receives faxes after the number of rings that are specified by the Rings to answer

123 HP DJ 3722 Web Services

To set up Web Services

  • Connect your printer to the Internet using either an Ethernet or wireless connection.
  • Use one of the following methods to set up web services:

Use the printer control panel

Setup>web services setup>accept

Use the HP printer software

Open the HP printer software

Go to Print>printer home page>web services>setup>continue

Use the embedded web server

Open the Embedded web server.

Click Web Services >Web Services Settings>Setup>Continue

  • Once the printer connects to the server, the printer will automatically print an information page. Follow the instructions on the information page to finish the setup.

How to use Web Services

To print documents using HP ePrint

  • Create a new email message.
  • Attach the file that you want to print.
  • Enter the HP ePrintemail address in the “To” field
  • Send the email.

.NOTE: Do not enter multiple email addresses.

To turn off HP ePrint

  • Go to printer control panel
  • Tap onHP ePrint>Web Services Settings>HP ePrint>Off

To remove Web Services

  • Using the printer control panel

HP ePrint>Web Services settings>Remove Web Services.

  • Using the embedded web server

Embedded web server>Web Services>Web Services Settings> Remove Web Services

For successful printing:

  • Use original HP cartridges.
  • Install both the black and color cartridges correctly.
  • Do not ignore the ink level warnings.
  • Always turn the printer off when not in use.
  • Load the stack of paper properly in the input tray.
  • Use same size papers to avoid paper jam
  • Load paper print side down
  • Make sure the paper guides don’t bend the paper.

For successful copying and scanning:

  • Keep the glass and the back of the lid clean.
  • Load the document print-side down on the scanner glass.
  • To adjust scan size, resolution and file type, start the scan from the printer software.
  • To make a large copy of a small document, scan it into the computer, resize, and then print a copy of the enlarged image
  • To scan a document with several pages into one file instead of multiple files, start the scan with the printer software instead of selecting Scan from the printer display.

Disclaimer: We resolve the customer’s technical issues remotely with basic charges depending on the troubleshooting done by our certified technician, Our services motto is to satisfy the customer’s needs and solve the problems withing our SLA provided. Download latest software driver install link below : 123.hp.com/setup 3722 or 123.hp.com/dj3722